-
You do not have any products in your shopping cart yet.
Main page
»
RC Models
»
Building Kits
»
Crawler Kit
»
AXIAL SCX10 III Jeep Wrangler with Portals 4WD Kit












AXIAL SCX10 III Jeep Wrangler with Portals 4WD Kit
AXIAL SCX10 III Jeep Wrangler with Portals 4WD Kit
The 1/10 scale Axial® SCX10™ III Jeep® JLU Wrangler 4WD kit marks the next step forward in scale off-road action. While continuing to incorporate key components that have made SCX10™ vehicles successful, the SCX10™ III increases chassis realism with details that include a replica V8 engine to house the front-mounted 540 motor. It's mated to a realistic transmission housing and transfer case, like a 1:1 vehicle.
The kit's versatile transmission can be built in several ways. If you're using a 3-channel radio like the Spektrum™ DX3™, you can set it up with a third-channel DIG function that lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius. Another 3-channel option is to set up the vehicle with a two-speed transmission to select between high and low speeds. To have access to the two-speed transmission and DIG function simultaneously, just add another servo and use a radio with at least four channels (such as the 5-channel Spektrum™ DX5).
The SCX10™ III Jeep® JLU Wrangler kit uses portal axles to improve performance by increasing the ground clearance and reducing torque twist. Its standard battery tray accepts full-size standard LiPo or NiMH packs. There's also space on the side rails for drivers who prefer "shorty" packs. Inner fenders and floor sides hide internal components that would usually be visible from the side of the chassis.
To top off the chassis, the kit comes with a clear Jeep® Wrangler Unlimited four-door body that's ready for finishing however you like. Scale details include a roll cage, front hood vents and cowl, windshield wipers, mirrors, door handles and more, plus a detailed interior. New taller and wider, officially licensed Nitto Trail Grappler tires on 3-piece licensed KMC Machete beadlock wheels add more scale realism and more grip on dirt, rocks, and all other off-road trails.
Axial SCX10 III Jeep Wrangler KIT SPECS:
Manufacturer: AXIC1367
Approximate Assembly: Time 7-10 Hours
Ball Bearings: Complete set
Body: Clear polycarbonate Jeep Wrangler Unlimited with detailed interior
Brakes: Integral with ESC
Bushing Material: Metal
Chassis: Adjustable steel C-channel
Completion Level: Kit
Differential: Locked
Drivetrain: 4WD
Final Drive Ratio: 45.6:1
Power Type: Electric
Gear Pitch: 32-Pitch
Ground Clearance: 3 in (76.2mm)
Max Battery Dimensions: 5.47 x 1.85 x 0.98 in (139 x 47 x 25mm)
Motor Size: 540 (sold separately)
Outer Diameter: 4.7 in (119mm)
Pinion: 14T
Product Height: 9.5 in (241mm)
Product Length: 19.125 in (485mm)
Product Weight: 6.5 lbs (2.9kg)
Product Width: 9.25 in (234mm)
Scale: 1/10
Shock Type: Oil-filled coil over spring
Spur Gear: 40T
Suspension: Multi-link solid axle
Tire Compound: R30
Tire Tread: Nitto Trail Grappler M/T
Track Surface: Front and Rear 8.9" (226mm) distance from outer edges of tires measured side to side
Vehicle Type: Rock Crawler
Water-Resistant: Yes
Wheelbase: 12.3 in (312mm)
Wheel Hex: Size 12mm
Wheel Type: Injection molded 3-piece beadlock 1.9 KMC Machete
Wheel Width: 1 in (25.5mm)
Manufacturer: AXIC1367
Approximate Assembly: Time 7-10 Hours
Ball Bearings: Complete set
Body: Clear polycarbonate Jeep Wrangler Unlimited with detailed interior
Brakes: Integral with ESC
Bushing Material: Metal
Chassis: Adjustable steel C-channel
Completion Level: Kit
Differential: Locked
Drivetrain: 4WD
Final Drive Ratio: 45.6:1
Power Type: Electric
Gear Pitch: 32-Pitch
Ground Clearance: 3 in (76.2mm)
Max Battery Dimensions: 5.47 x 1.85 x 0.98 in (139 x 47 x 25mm)
Motor Size: 540 (sold separately)
Outer Diameter: 4.7 in (119mm)
Pinion: 14T
Product Height: 9.5 in (241mm)
Product Length: 19.125 in (485mm)
Product Weight: 6.5 lbs (2.9kg)
Product Width: 9.25 in (234mm)
Scale: 1/10
Shock Type: Oil-filled coil over spring
Spur Gear: 40T
Suspension: Multi-link solid axle
Tire Compound: R30
Tire Tread: Nitto Trail Grappler M/T
Track Surface: Front and Rear 8.9" (226mm) distance from outer edges of tires measured side to side
Vehicle Type: Rock Crawler
Water-Resistant: Yes
Wheelbase: 12.3 in (312mm)
Wheel Hex: Size 12mm
Wheel Type: Injection molded 3-piece beadlock 1.9 KMC Machete
Wheel Width: 1 in (25.5mm)
Included:
- (1) Axial® SCX10™ III Jeep® JLU Wrangler 4WD Kit with clear body
- (1) Product Manual
- (1) 4-Channel Transmitter and Receiver
- (1) Steering servo
- (1) ESC and Motor
- (2) Micro Servo's
- (1) Battery (accepts standard and shorty packs)
- (1) Compatible Charger
- (4) AA Batteries
- (1) Paint (for polycarbonate plastic)
For more information, please visit the home page for this product.