RC Car Colours Lexan Print Varnish No.943 Spray Paint 150ml

RC Car Colours Lexan Print Varnish No.943 Spray Paint 150ml

RC Car Colors have been specially developed for painting Lexan bodies. The surface of the bodywork is dissolved by the special solvent and the paint bonds permanently to the plastic.
No chipping, no scratching, the color remains elastic, even in the event of a strong crash!


Features:

• remains elastic
• connects permanently to the body
• Fuel Resistant

Application Notes:

• Many bodies have a protective film on the outside, remove this only AFTER painting
• Some prefer to cut out the body beforehand
• Thoroughly clean the bodywork with detergent or brake cleaner
• Shake the can vigorously for about 2 minutes
• Spray the paint from a distance of 20-30cm
• Always start with the darkest color as this would show through the light colors the other way around
• Spray on several thin layers and never just one thick one, wait about 5 minutes between two processes
• Wait at least 5 minutes. before removing the protective film or masking film/foil of the design
• When you're done, turn the can upside down and spray for about 2 seconds. to empty the nozzle

Special note for neon (fluo) colors:

This color is not as opaque as the standard colors, spray on several fine coats.
The ambient temperature should be at least 15°C
Spray from a distance of 15-20cm
Wait about 30 minutes and deposit the fluo / neon color with white. This is the only way to get optimal luminosity from the neon colors.

Contents:
150ml